TBR Series
 
sales@hi-lo.com --- 800-373-2279

 

TBR Series Features

Provides a simplified, economical and trouble free drive system. While belt misalignment is inherent, it is minimal using standard V-belts. The Drive should be aligned with the belt at the mean diameter of the variable pulley and the recommended shaft center distance used as a minimum.

Aluminum Alloy Pulley Face Material
Faces are light weight, corrosion resistant and have a high wearability computability between the belt and face surface. The model 86TBR uses close grain cast iron faces .

Permanently Lubricated Moveable Face Bushings

 

    High load carrying precisely fit bronze bushings with a specially formulated
    oil impregnation are used to eliminate most fretting and corrosion problems.
    For severe corrosion conditions the pulley shaft can be treated to resist the
    particular corrosion condition.
Torque Sensing Design
    Belt tension is regulated to the load requirements. Bushing wear is reduced
    by the peripheral support of the cam followers. There are no torque carrying keys
Dimensions
.
HP at 1750 RPM HP at 1150 RPM Torque Capacity lb-in Model Number Max P.D. Min P.D. Ratio Belt Size A B C D E F G Stock-thru-Boxes
0.75 0.5 27 30TBR 3.13 1.57 2:1 A 3.38 2.69 .78 .97 1.69 1.88 3.06 .5, .625, .75
1 .75 36 40TBR 4.00 1.60 2.5:1 A 4.25 2.69 .78 .97 1.69 1.88 3.06 .5, .625, .75
1.5 1 54 50TBR 4.65 1.72 2.7:1 B 5.00 3.06 .78 1.01 1.88 1.88 4.06 .5, .625, .75, .875
2 1.5 72 57-20TBR 5.40 2.16 2.5:1 B 5.75 3.06 .78 1.01 1.88 1.88 4.06 .5, .625, .75, .875
3 2 108 57TBR 5.40 2.16 2.5:1 B 5.75 3.88 1.09 1.33 2.44 2.25 5.07 .625, .75, .875, 1, 1.125
5 3 180 66TBR 6.20 3.10 2:1 B 6.63 3.88 1.09 1.33 2.31 2.25 5.07 .75, .875, .1, 1.25
5 3 180 86TBR 8.28 5.17 1.6:1 B 8.63 3.88 1.09 1.33 2.44 2.25 5.07 .75, .875, 1., 1.25