DCW Series		info@hi-lo.com --- 800-373-2279

DCW Series Features	Uses Variable Speed belts. Maintains belt alignment between the variable speed pulley and the companion sheave. The wider varible speed belts allow a greater speed ratio change than standard V-belts while maintioning a match between the included angle of the pulley gaces and the belt.
Pulley Face Material	Models 1160 and 1270 use a light weight, corrosion resistant, aluminum alloy material. Models 1590, 1711, 2011 and 2513 use close grained cast iron faces.
Permanently Lubricated Moveable Face Bushings	High load carrying precisely fit bronze bushings with a specially formulated oil impregnation are used to eliminate most fretting and corrosion problems. For severe corrosion conditions the pulley shaft can be treated to resist the particular corrosion condition.
Torque Sensing Design	Belt tension is regulated to the load requirements. Bushing wear is reduced by the peripheral support of the cam followers. There are no torque carrying keys
Dimensions
. HP at 1750 RPM HP at 1150 RPM Torque Capacity lb-in. Model Number Max P.D. Min P.D. Ratio Belt Size A B C Bore Depth D E F Stock Bores G Shaft Travel (inches) 1.5 1 54 1160 5.90 1.98 3:1 1422V 6.13 4.38 2.19 2.25 1.88 4.06 .625,.75,.875 2.90 3 2 108 1270 7.28 2.42 3:1 1922V 7.50 5.88 2.87 3.25 2.25 5.07 .75,.875,.1,1.125 3.40 58 3 180 1590 8.75 2.90 3:1 2322V 9.00 7.06 3.53 3.87 4.25 7.13 1.125,1.25,1.375 4.30 10 7.5 360 1711 10.70 3.57 3:1 3226V 11.00 8.66 4.33 4.50 4.25 7.13 1.125,1.25,1.375 5.00 20 15 720 2011 10.65 4.26 2.5:1 3230HV 11.00 9.75 4.88 4.62 4.25 7.13 1.375,1.625,1.875 4.60 30 20 1080 2513 12.60 4.20 3:1 4430V 13.00 9.75 4.88 4.62 4.25 7.13 1.375,1.625,1.875 5.90

Produced by Triangle Park Creative, Minneapolis, MN